2022 Linde L-MATIC Base

Information

2022 Linde L-MATIC

Effective Load Handling for Low Lift Heights

The Linde Material Handling L-MATIC pallet stacker is suitable for storage or removals at low level. It tackles loads of up to 1,200 kg and lift heights up to 1.9 meters. Thanks to infrastructure free geo-navigation, the L-MATIC can be used flexibly as an individual truck or as part of an automated fleet. When operating in this manner, the robotic forklift is able to integrate safely and efficiently with people, non-automated trucks or the customer’s infrastructure, such as belt conveyors or packing stations. Furthermore, manual operation is possible at any time, used to, for example, move the equipment away from a dangerous zone quickly in the event of an emergency, or to use the truck to carry out another short-term task.

Features may include:
  • Navigation module on a robust frame with lighting signals, control panel, touch screen, communication module, navigation laser, front & rear safety scanner, traction/steering & lifting software management
  • Drive wheel and tandem load wheels polyurethane
  • Lateral change 3PzS
  • Standard mast 1924 mm
  • Fork carriage 560/1150/55 mm built out
  • Pre-setting for wet battery
  • Key switch truck acess
  • Polycarbonate mast protection
  • Load detection sensor
  • 3D camera for volume perception (technical conditions apply)

Photos

Highlights

  • Tampa, Florida
  • 2022
  • Linde
  • L-MATIC Base
  • Available
  • Of fork carriage: 780 mm | Aisle with pallet 1000 x 1200 across forks: 2868 mm | Aisle with pallet 800 x 1200 along forks: 2739 mm
  • Of mast, lowered: 1490 mm | Of mast, extended: 2460 mm | Of tiller arm in operating position, min/max: 1140 / 1350 mm | Lowered: 86 mm

Specifications

  • 2022
  • Linde
  • L-MATIC
  • Base
  • General
  • Travel, with/without load: 6 / 6 km/h | Lifting, with/without load: 0.11 / 0.22 m/s | Lowering, with/without load: 0.3 / 0.3 m/s
  • LAC
  • Ø 254 x 102
  • 2x Ø 85 x 85
  • Number front/rear: 1x + 2 / 2
  • Load centre: 600 c (mm) | Axle centre to fork face: 948 mm | Fork: 55 mm x 180 mm x 1150 mm
  • 1625 y (mm)
  • Front: 544 mm | Rear: 380 mm
  • Of mast, lowered: 1490 mm | Of mast, extended: 2460 mm | Of tiller arm in operating position, min/max: 1140 / 1350 mm | Lowered: 86 mm
  • 2285 mm
  • To fork face: 1135 mm
  • 804 mm
  • Centre Of Wheelbase: 20 mm
  • Of fork carriage: 780 mm | Aisle with pallet 1000 x 1200 across forks: 2868 mm | Aisle with pallet 800 x 1200 along forks: 2739 mm
  • 2066 mm
  • 1.2 / 2.0 t
  • With Load: 1367 mm | Without Load: 1110 kg
  • With Load: 1248 mm | Without Load: 305 kg
  • Service: 1415 kg | Battery: 295 kg